|
|
| |
| Solid wood bending machine |
| Press Machine |
|
|
Product Introduction:
The component of the Solid wood bending machine:
Hot press, steam soften vessel, working table, controlling switch.
The overall size of the press is High 3000mm*width1000mm*longth 1200mm
Total weight: about 5T
Working process of the system:
1 Soften the wood material in the steam soften vessel
2 Put them on the working table,
3 Move it from working table to the hot press,
4 The hot press bend the wood and dry it.
The pressure of hot press off, take the bent material out.
The machine got patent.
Mode of the machine
RYS-I-40JY
The material of the Steam vessel and its tube.
Stainless
The capacitance of the steam soften vessel.
?400z*1500mm
The air pressure within the steam vessel
0.4-0.6Mpa
The steam pressure needed
0.1Mpa
Steam pressure required
0.7MPa
Consumption of steam
200kg/hour
Soften time
About 60min(2cm thickness, the time may differ with different wood and thickness)
Power of the steam soften vessel
2.5kW
Layer of the press
4
Forming and drying time of bend wood
About 60min (the time may differ with different wood and thickness)
The productivity of the press
About 40-50pcs/1.5hour(100mm width wood ppiece)
|
|
|
| |
|
|
|
